Oval Face Shape
Free AI Face Shape Detector – Find Your Face Shape Online
Free · Private · No sign-up

Free AI Face Shape Detector

What shape face do I have? Find your face shape from a photo, your live camera or four measurements. This free face shape finder maps 478 facial landmarks in your browser, compares your face length, forehead, cheekbone and jaw proportions with ten face-shape profiles, and shows your closest match with hairstyle, beard and glasses ideas.

  • Photo upload
  • Live camera
  • Manual measurements
  • 10 face shapes

Your photo is analysed on your device. It is not uploaded to our servers or saved by the site. Privacy Policy

The four face measurements A face outline with four numbered measurements: 1 face length from hairline to chin, 2 forehead width, 3 cheekbone width, 4 jaw width. 2341 HairlineChin
  1. Face length
  2. Forehead width
  3. Cheekbone width
  4. Jaw width

Length ÷ cheekbone width tells long from wide

The four measurements the detector compares.

Face shape analysis: find your face shape

On-device · Not uploaded

Drop a photo here

Use a clear, front-facing photo with your hair pulled back.

Your face shape results

Your photo

Your closest match

–
Match score
0%

A closeness score across ten profiles. It is not a probability or an accuracy rating.

Read your shape guide

Measurements

MetricValue

Relative proportions, not physical measurements.

Why this shape

Hairstyles

    Beards

      Glasses

        Styling

          Face care

            How to find your face shape

            Quick answer. To find your face shape, compare four measurements: face length, forehead width, cheekbone width and jaw width. Divide length by cheekbone width. About 1.3–1.5 is oval-length, 1.15 or less is round or square, and 1.5 or more is rectangle or oblong. Then check which width is largest and whether your jaw is rounded or angular. The detector above does all of this from a photo in seconds, or you can enter your own measurements.
            1. Face the camera or mirrorPull your hair back and look straight ahead in even light.
            2. Get four measurementsLet the detector map them, or measure with a soft tape.
            3. Divide length by cheekbone widthThis one ratio separates long faces from wide ones.
            4. Check the widest point and jawMatch them to the table below to name your shape.

            What shape face do I have? Start with your widest point

            Your widest partYour jaw and lengthLikely shape
            ForeheadNarrows to a tapered chinHeart or inverted triangle
            CheekbonesForehead and jaw both narrowDiamond
            JawAngular, with a narrower foreheadTriangle
            JawFuller and rounded, forehead narrowestPear
            All three similarSoft and curved, length 1.15× width or lessRound
            All three similarStrong and angular, length 1.15× width or lessSquare
            All three similarAngular, length 1.5× width or moreRectangle
            All three similarStraight, length 1.5× width or moreOblong
            Forehead slightly wider than jawGently rounded, length 1.3–1.5× widthOval

            These ranges are this tool's classification heuristics, not scientific thresholds. Many faces sit between two shapes.

            How the detector works

            Four automatic steps, all in your browser.

            1

            Provide an image

            Upload, drag in or capture a front-facing photo.

            2

            Map landmarks

            An on-device model returns 478 3D points, including 10 iris points.

            3

            Measure ratios

            Length-to-width, forehead-to-jaw, forehead-to-cheekbone, chin-to-jaw and jaw angle.

            4

            Match a profile

            Your ratios are compared with ten profiles and the closest one wins.

            Technology. The tool uses the Google AI Edge MediaPipe Face Landmarker. Only a small set of points (forehead, temples, cheekbones, jaw corners, chin) feeds the classification; iris points are not used. More landmarks do not by themselves mean higher accuracy, and the classification has not been independently validated. Landmark definitions follow common anthropometry practice (Farkas, Anthropometry of the Head and Face, 1994), but the face-shape categories and thresholds are this site's own styling classification. How facial landmarks work

            Photo tips for a reliable result

            Small changes to the photo move the numbers more than anything else.

            Face the camera

            Head level, looking straight at the lens at eye height. Tilt skews width and length.

            Even light

            Soft light from the front. Hard side shadows hide the jaw and temple edges.

            Hair back

            Show the hairline, temples and jaw. Hair across them shifts the landmarks.

            Neutral face

            Mouth closed, no big smile, no hat or sunglasses. Fill most of the frame.

            Check your face shape by hand

            No camera needed. Pull your hair back and take four measurements with a soft tape, then enter them in the Measurements tab.

            1

            Forehead width

            Across the widest part, about a finger above the eyebrows.

            2

            Cheekbone width

            Between the highest points of the cheekbones.

            3

            Jawline width

            Corner to corner across the widest part of the jaw.

            4

            Face length

            Centre of the hairline straight down to the chin tip.

            Two signals separate most shapes: the length-to-width ratio, and which width is largest. The manual method skips chin width and jaw angle, so it can differ slightly from the photo method.

            The ten face shapes

            Open any shape for its full styling guide.

            Facial proportions and measurement guidelines

            Ratios are length ÷ cheekbone (bizygomatic) width. They are classification heuristics used by this tool, not universal scientific thresholds. Pear and inverted triangle are told apart mainly by jaw, cheekbone and forehead proportions.

            Face shapeLength ÷ widthJawlineForehead
            Oval1.3–1.5× (up to ~1.5)Gently roundedSlightly wider than jaw
            RoundRoughly equal (≤1.15)Soft, curvedRounded, similar width to cheeks
            SquareRoughly equal (≤1.15)Strong, angularStraight, similar width to jaw
            Rectangle1.5×+ (elongated)Angular, defined, narrower than foreheadWider than jaw
            Oblong1.5×+ (elongated)Straight, minimal curveClose to jaw width
            Heart1.3–1.5×Narrow, taperedWidest point
            Diamond1.3–1.5×Narrow, pointedNarrow
            Triangle1.3–1.5×Widest point, angularNarrow, narrower than jaw
            PearRoughly averageFuller, widest pointNarrow, narrowest point
            Inverted triangleRoughly average to moderately longerNarrow, sharply taperedWidest point

            Best styles for every face shape

            Pick a shape to see hairstyle, beard and glasses ideas. The aim is always balance: add width to a long face, length to a wide one, and weight where the face is narrow.

            Long shapes

            Oval, oblong, rectangle. Add width with waves, bangs and side volume; skip extra height.

            Wide shapes

            Round, square. Add height and vertical lines; layers and off-centre parts slim the face.

            Top-heavy shapes

            Heart, diamond, inverted triangle. Add fullness at the jaw with chin-length cuts.

            Bottom-heavy shapes

            Triangle, pear. Add crown volume and forehead width with quiffs and bangs.

            Which method should you use?

            All three give an estimate. If two methods disagree, read both shape guides.

            MethodNeedsSignals usedBest for
            Upload photoA front-facing image5: length, forehead, jaw, chin, jaw angleFast result with a measurement overlay
            Live cameraCamera permissionSame 5 as uploadNo saved photo on your device first
            MeasurementsSoft tape, 4 numbers3: length ÷ width, forehead ÷ jaw, forehead ÷ cheekNo camera, full control over the inputs

            Accuracy and privacy

            478landmarks mapped
            10face shapes scored
            5ratios per photo
            0photos uploaded

            How accurate is it?

            Results come from measured geometry, not random output, so the same photo always gives the same answer. Angle, distance, lighting, hair over the forehead or jaw, expression and image quality can all move the result. It is a styling aid, not a medical or clinical measurement, and many faces sit between two shapes.

            Is my photo kept?

            No. Photos and camera frames are analysed in your browser. They are not uploaded to our servers, stored, or used for AI training. Your browser does download the model, page code and fonts from jsDelivr and Google; that is the tool coming to your photo, not your photo going out. Downloaded result cards are saved only on your device.

            Frequently asked questions

            What shape face do I have?

            Upload a photo, use your live camera or enter four measurements above. The tool compares your proportions with ten face shape profiles and names the closest match, plus a second shape when two score closely. By hand, find your widest point and divide face length by cheekbone width.

            How do I find my face shape?

            Pull your hair back, face the camera straight on and run the face shape detector. Or measure face length, forehead, cheekbone and jaw width, divide length by cheekbone width, then compare the widest point and jaw with the reference chart on this page.

            How can I tell my face shape without a photo?

            Measure four distances with a soft tape and enter them in the Measurements tab. The tool compares length ÷ width, forehead ÷ jaw and forehead ÷ cheekbone ratios with the same ten profiles. It cannot measure chin width or jaw angle, so treat it as an estimate.

            What is an AI face shape detector and how does it work?

            It finds facial landmarks in an image, measures distances such as face length and forehead, cheekbone and jaw width, and compares those ratios with known face shape categories. This one runs the landmark model in your browser.

            How accurate is this face shape detector?

            It measures proportions from 478 facial landmarks and compares them with ten profiles, so the same photo gives the same result every time. It is a styling estimate, not a clinical measurement, and the classification has not been independently validated.

            Which face shapes can it detect?

            Ten: oval, round, square, rectangle, oblong, heart, diamond, triangle, pear and inverted triangle.

            Is my uploaded photo stored or shared?

            No. Your photo or camera frame is analysed in your browser, never uploaded to OvalFaceShape.com's servers, stored or shared. It is removed when you leave the page, refresh, or choose another image.

            What is the best photo to use?

            A clear, well-lit, front-facing photo at eye level, with hair pulled back, a neutral expression, and no sunglasses or hat.

            Can I have more than one face shape?

            Yes. When two profiles score closely, the result names the second as also close. Reading both guides is more useful than forcing one label.

            Is this a face shape filter?

            No. It is not a camera filter or effect for social apps. It analyses your proportions, draws measurement lines over your photo and gives a result with styling suggestions.

            Is face shape analysis the same as a face symmetry test?

            No. Face shape compares overall proportions; a symmetry test compares the left and right sides of your face. They measure different things. Try the Face Symmetry Test for that.

            What if it cannot find my face?

            Use a clear front-facing photo in good light with your face filling most of the frame. If that still fails, use the Measurements tab.

            Is the face shape finder free?

            Yes, completely free with no sign-up or payment.

            Meet the founder

            Muhammad Rehan Iqbal (Rehan Mir)

            Founder & Developer, OvalFaceShape.com

            Muhammad Rehan Iqbal, professionally known as Rehan Mir, is the founder and developer of OvalFaceShape.com. He researches face shapes, facial proportions, hairstyles, glasses, grooming, and face-analysis tools to create clear, practical, and trustworthy guidance.

            Oval Face Shape — Footer